02:30
máy tính nguyên vũ
It is possible to reproduce the multichannel sources including SACD or DVD-Audio by the DVD input being equivalent to a six-channel input, and adding power amplifier.
The Puri Power independent stream composition is adopted and high-quality sound-ization is attained.
The newly developed current feedback type is adopted as all six channels at the preamplifier part. This realizes a low-noise high slew rate, and reservation of the accelerating and dynamic range which can respond to a next-generation audio is aimed at.
The motor-drive 6-unit volume of a die-casting frame which has less deflection between channels than the conventional volume and whose performance is higher than an electronic volume is adopted as a volume.
The current feedback type is adopted as a power amplifier part. A phase compensation is also light by lowering a feedback impedance, and high speed amplifier is realized.
Moreover, have adopted the L-A-P-T transistor excellent in the high region property as a power device, a heat sink on either side is made to become independent, and the oscillation and the thermal crosstalk are reduced.
The super ring-core toroidal transformer, the "shot key barrier type rectifying device" low-noise in a high-speed and a low loss, etc. are adopted as a power-source part.
The standard newest model by German WBT is adopted as a speaker terminal as an SA series Integrated Amplifier, and the banana plug and Y lug are also supported.
The intensity of a chassis is raised, while having adopted as a chassis the double layered chassis which added the bottom plate of the 1.6mm thickness of a wall thickness steel plate and reducing the influence on the tone quality by the oscillation from the outside.
The compact disk&DVD direct input directly linked with a preamplifier part by exclusive relay is carried.
The full REC serector with the Lec buffer is carried.
The gilding treatment is performed to the input/output terminal.
The inlet type AC cable is adopted.
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
.JPG)
| Form | Stereo Integrated Amplifier |
| Output power (20Hz - 20kHz, both channel drive) | 90W+90W (4ohms) 75W+75W (6ohms) 60W+60W (8ohms) |
| THD (20Hz - 20kHz, both channel drive) | 0.01% (at the time of an 8-ohm load intensity) |
| Cross modulation distortion (SMPTE) | 0.01% |
| Output bandwidth (an 8-ohm load intensity, 0.04%) | 10Hz - 50kHz |
| Frequency characteristic (compact disk, Source Direct) | 5Hz-70kHz+0 -1 dB |
| Dumping factor (20Hz - 20kHz) | 100 (8-ohm load intensity) |
| Input sensitivity/impedance | Phono man month: 2.4mV/47kohm High SFT Level: 210mV/25kohm |
| SN ratio (an IHF A network, input short-circuit) | Phono MM:85dB High Level:110dB |
| Tone control | Bass: ±8dB (100Hz) Treble: ±8dB (10kHz) |
| Supply voltage | AC100V, 50Hz/60Hz |
| Power consumption (Electrical Appliance and Material Control Law) | 160W |
| The maximum Dimensions | Width 440x height 124x depth of 340mm |
| Weight | 9.0kg |
| Adjunct | System remote control AC cable |
Posted in: 
0 nhận xét:
Post a Comment