20:42
máy tính nguyên vũ
The current feedback type is adopted as a power amplifier part.
The variable input is also carried in addition to a direct input. The variable input is set as the same 29dB as a common AV amplifier in the maximum gain.
Moreover, the direct input is made into the same gain as the power part of PM6100SA, and the use as a by amplifier drive is possible for the time of a combination using.
The stack of two or more sets of the SM6100SAs is carried out, and the through output termination which can be driven is carried simultaneously.
The termination by the German WBC company is adopted as a speaker terminal.
The inlet type AC cable is adopted.
.JPG)
| Form | Stereo power amplifier |
| Output power (20Hz - 20kHz, both channel drive) | 70W+70W (4ohm) 60W+60W (6ohm) 50W+50W (8ohm) |
| THD (20Hz - 20kHz, both channel drive) | 0.01% (at the time of an 8-ohm load intensity) |
| Cross modulation distortion (SMPTE) | 0.01% |
| Output bandwidth (an 8-ohm load intensity, 0.04%) | 10Hz - 50kHz |
| Frequency characteristic (compact disk, Source Direct) | 5Hz-80kHz+0 -1 dB |
| Dumping factor (20Hz - 20kHz) | 100 (8-ohm load intensity) or more |
| Input sensitivity/impedance | Direct input: 1.5V/28kohm Variable input: 0.7V/33kohm |
| SN ratio (an IHF A network, input short-circuit) | Direct input: 110dB |
| Supply voltage | AC100V, 50Hz/60Hz |
| Power consumption (Electrical Appliance and Material Control Law) | 135W |
| The maximum Dimensions | Width 440x height 124x depth of 320mm |
| Weight | 7.5kg |
| Adjunct | AC cable |
Posted in: 
0 nhận xét:
Post a Comment