05:12
máy tính nguyên vũ
An operation of a picture recording etc. is possible to Tape1 in an FM broadcast, carrying the Rec out selector and carrying out a record play.
A phone amplifier part selects carefully and uses especially elements, such as a transistor, and is attaining high-quality sound-ization while it performs a Low-TIM design.
Moreover, it corresponds to MC cartridge by carrying MC position, and also various cartridges are supported by carrying 3 position cartridge selector in Phono1.
In addition to the OUT position removed from a circuitry, the tone switchpoint which can bypass the tone amplifier itself also carries only the tone element in the tone control.
A loudness circuitry, a subsonic-speed circuitry, etc. of two positions are carried.
.JPG)
| Form | Stereo control console |
| An Output power/impedance | Pre out: 1.5V/220 ohm |
| Input sensitivity/impedance | Phono man month: 2.8mV / 27kohm, 47kohm,
100kohm Phono MC: 0.28mV/100 ohms Tape, Tuner, Aux:150mV /, 33kohm |
| THD | 0.005% |
| Frequency characteristic | RIAA and 20Hz-20kHz±0.3dB 5Hz-100kHz+0 -1 dB |
| SN ratio (IHF-A) | Phono MM:84dB Phono MC:66dB Tape, Tuner, Aux: 98dB |
| The phone maximum input | MM:280mV MC:22mV |
| Tone control | Bass: ±10dB (100Hz) Treble: ±10dB (10kHz) |
| Loudness control | + 4dB, +8dB |
| Supply voltage | AC100V, 50Hz/60Hz |
| Power consumption | 6W |
| Dimensions | Width 416x height 73x depth of 194mm |
| Weight | 2.9kg |
Posted in: 
0 nhận xét:
Post a Comment