05:16
máy tính nguyên vũ
CDM-1 original drive mechanism adopted as representation models including LHH2000 is adopted as a mechanism part. The swing arm supporting a pickup part serves as a dynamic blance type which is a structure contrastive with the usual linear-tracking, and allotted the wait to the rear.
The linear motor is adopted as an actuator and the smooth operation is realized. Moreover, a pickup part has little aberration and has adopted "1 Beam scheme" excellent in the temperature characteristic.
The newly developed automatic servo change circuitry is carried in the servo circuitry, a sensor detects the magnitude of 12cmCD and 8cmCD, and the servo circuitry in a motor is switched automatically.
The toroidal transformer is adopted as a power-source part, and the source impedance fall of the smooth electric power supply to a servo circuitry and a digital circuit is aimed at.
High rigidity die-casting is adopted as a chassis. Moreover, to the sole plate, absent-resonance-ization, such as using die-casting also for a side panel, is attained using the griddle of 3mm thickness.
Moreover, the original ARC (Aluminium Raft Celing) structure is adopted as a top cover, and according to 3 piece structures which cut Raft (the shape of a raft), while increasing the intensity, the oscillation mode was diffused, and the vibration is prevented.
compact-disk file bank FTS which can choose and memorize a favorite track is carried. Thereby, if memory is carried out once, it can file semipermanently.
.JPG)
| Form | compact-disk transport |
| Output voltage | Coaxial: 0.5 Vp-p/75ohm Optical: -19dBm (square-shaped light connector) |
| Laser | AlGaAs semiconductor |
| Wavelength | 780nm |
| Sampling frequency | 44.1kHz |
| Quatization | A 16-bit linear / channel |
| Power source | AC100V, 50Hz/60Hz |
| Power consumption | 13W |
| The maximum Dimensions | Width 454x height 106x depth of 345mm |
| Weight | 14.0kg |
Posted in: 
0 nhận xét:
Post a Comment