02:00
máy tính nguyên vũ
116H which is a 20cm cone type Woofer is adopted as low-pass.
It is suitably developed severely in pursuit of input characteristics-proof etc. for the monitor, and the Low-noise-izing is attained.
Moreover, the hard cone paper with a corrugation, the diameter voice coil of 5cm of a precision design, pole piece and gap which have improved the high region property, the frame made from aluminum die-casting, etc. were adopted, and the more smooth frequency characteristic is acquired.
LE26 of a 3.6cm direct radiator is adopted as a high region.
Adoption of hard cone paper and a center dome has realized the directional characteristics of level and 90 degrees (10kHz) of perpendicularities.
Moreover, the perimeter of a unit is wrapped in a resin system material with a taper, and while improving a consistency with a baffle board, the improvement in directional characteristics or energetics is aimed at.
The network part has adopted the thing in consideration of a phase response or an impedance correction.
19mm thickness high-density compressed is used for an enclosure.
| Scheme | 2 ways, 2 loudspeaker bass-reflex scheme, and a bookshelf type |
| Unit | For low-pass: 20cm cone type (116H) For high regions: 3.6cm direct radiator (LE26) |
| Play frequency band | 45Hz-15kHz±3dB |
| Directional characteristics | 90 degrees (horizontal and vertical) |
| Cross over frequency | 2500Hz |
| Impedance | 8ohms |
| Output sound pressure level | 88dB/W/m |
| Allowable input | 15W(RMS) |
| Enclosure dimension | 28L |
| Dimensions | Width 291x height 483x depth of 306mm |
| Weight | 12.7kg |
Posted in: 
0 nhận xét:
Post a Comment