Marantz SH-A20 208,000yen(around the 1983 time)

The Integrated Amplifier developed not aiming at a technology but aiming at the sound near [ it is infinite to a human being's sensitivity, and ] it for the technology.

Unlike a general high gain equalizer stream composition, full-scale MC head amplifier with the super-low-noise transistor selected carefully is carried.
Moreover, by the high precision equalizer element and a whole page perfect push-pull circuit, phone amplifier realizes a wide band and a low-noise, and also can enjoy the play which employed efficiently the personality which each man-month cartridge has with the Dolo selector.

The AB class DC power amplifier part puts into practice the Low-TIM design original with a Marantz which suppresses dynamic distortion to the minimum from the input stage of matched-pair dual FET to the output stage of a three-step Darlington connection with a super high fT transistor.

The mass toroidal transformer and the super audio capacitor are adopted as a power-source part.

The mic mixing circuitries including both the tapeses dubbing functionality, and a phone and tuner compact disk in which all sources and mixing are possible are carried. 

Form	Stereo Integrated Amplifier
Output power (20Hz - 20kHz)	130W+130W (8ohms)
THD	0.02% or less (20Hz - 20kHz, 8ohms)
Frequency characteristic	5Hz-100kHz±1dB
RIAA deflection	20Hz-20kHz±0.5dB
Input sensitivity	Phono MM:2.0mV Phono MC:0.11mV High Level:150mV
SN ratio (IHF-A)	Phono MM:84dB Phono MC:78dB High Level:94dB
Power dissipation	350W (Electrical Appliance and Material Control Law)
Dimensions	Width 461x height 193x depth of 345mm
Weight	16.5kg

Read more »

Marantz PM8100SA ver.2 75,000yen(July, 2003 release)

The Integrated Amplifier which supplied the circuitry high speed technology according PM8100SA to Absolute SA Technology original with a Marantz to the base, and raised completeness to it.

The multichannel input/output terminal is carried and it can develop into a multichannel play by adding power amplifier, such as SM6100SA ver.2.

The capacitor only for an audio is adopted as 17 decoupling capacitors of a pre part and the Power part. Moreover, the newly developed high-quality sound film capacitor is adopted everywhere. Furthermore, the schottky-barrier diode of the low-noise adopted with separate amplifier is used for a power-source block, and low-noise-ization is attained as it is efficient.

Grand potential is improved completely, repeating a tone-quality study, and the shake of potential is suppressed.

A six-channel preamplifier is carried.
Low-noise-izing and a high slew rate are realized by adopting a current feedback type as all the circuitry of six channels, and using a high precision low-noise metal film resistor and a film capacitor.

The motor-drive 6-unit volume of a die-casting frame is adopted as a volume.
From the conventional thing, this volume has little deflection between channels, and has obtained tone-quality performance higher than an electronic volume.

The current feedback type circuitry is adopted as a stereo power amplifier block. The phase compensation was made light by lowering a feedback impedance, and high speed amplifier is realized.
Moreover, in PM8100SA ver.2, parts which carried out with separate amplifier and it had, such as a film capacitor and a resistor, are adopted. Furthermore, the power device has adopted the transistor LAPT for audios excellent in the high region property.

The oscillation and the thermal crosstalk are reduced by making a heat sink on either side become independent.

The super ring-core toroidal transformer with little leakage magnetic flux is adopted as a power-source part. Moreover, the schottky-barrier diode is adopted as a rectifier circuit.

compact disk and the DVD input serve as a direct input design linking directly to a preamplifier part from the input terminal by the exclusive relay.

The speaker terminal made from German WBT is adopted as a speaker termination.

The full REC serector with the Lec buffer is carried.

The double layered chassis is adopted.

The phone equalizer amplifier corresponding to man-month cartridge is carried.

The inlet type AC cable is adopted.

Wireless remote control is attached. 

Form	Integrated Amplifier
Output power (20Hz - 20kHz, both channel simultaneous drive)	90W+90W (4ohms) 75W+75W (6ohms) 60W+60W (8ohms)
THD (20Hz - 20kHz, both channel simultaneous drive, 8ohms)	0.01%
Cross modulation distortion (SMPTE)	0.01%
Output bandwidth (an 8-ohm load intensity, 0.04%)	10Hz - 50kHz
Frequency characteristic (compact disk, Source Direct)	5Hz-70kHz+0 -1 dB
Dumping factor (8 ohms, 20Hz - 20kHz)	100
Input sensitivity/impedance	Phono man month: 2.4mV/47kohm High SFT Level: 210mV/25kohm
Phono maximum permissible input (1kHz)	MM:130mV
RIAA deflection (20Hz - 20kHz)	±0.2dB
S/N (an IHF A network, input short-circuit)	Phono MM:85dB High Level:110dB
Tone control	Bass: ±8dB (100Hz) Treble: ±8dB (10kHz)
Input terminal	Line (2ch): Two lines (compact disk, Tuner) Line (6ch): One line (DVD) micro disk or a tapes system: One line CD-Recordable: 1 line Phono: One line
Output-terminal	Pre out (6ch): One line micro disk or a tapes system: One line CD-Recordable: 1 line Speaker: One line Headphone: One line
Supply voltage	AC100V, 50Hz/60Hz
Power consumption (Electrical Appliance and Material Safety Law)	160W
The maximum Dimensions	Width 440x height 124x depth of 340mm
Weight	9.0kg
Adjunct	Wireless remote control AC cable

Read more »

Marantz PM8100SA 69,800yen(2000 release)

The Integrated Amplifier which inherited the design concept of PM-14SA or PM-17SA, and aimed at the correspondence to a next-generation audio.

It is possible to reproduce the multichannel sources including SACD or DVD-Audio by the DVD input being equivalent to a six-channel input, and adding power amplifier.

The Puri Power independent stream composition is adopted and high-quality sound-ization is attained.

The newly developed current feedback type is adopted as all six channels at the preamplifier part. This realizes a low-noise high slew rate, and reservation of the accelerating and dynamic range which can respond to a next-generation audio is aimed at.

The motor-drive 6-unit volume of a die-casting frame which has less deflection between channels than the conventional volume and whose performance is higher than an electronic volume is adopted as a volume.

The current feedback type is adopted as a power amplifier part. A phase compensation is also light by lowering a feedback impedance, and high speed amplifier is realized.
Moreover, have adopted the L-A-P-T transistor excellent in the high region property as a power device, a heat sink on either side is made to become independent, and the oscillation and the thermal crosstalk are reduced.

The super ring-core toroidal transformer, the "shot key barrier type rectifying device" low-noise in a high-speed and a low loss, etc. are adopted as a power-source part.

The standard newest model by German WBT is adopted as a speaker terminal as an SA series Integrated Amplifier, and the banana plug and Y lug are also supported.

The intensity of a chassis is raised, while having adopted as a chassis the double layered chassis which added the bottom plate of the 1.6mm thickness of a wall thickness steel plate and reducing the influence on the tone quality by the oscillation from the outside.

The compact disk&DVD direct input directly linked with a preamplifier part by exclusive relay is carried.

The full REC serector with the Lec buffer is carried.

The gilding treatment is performed to the input/output terminal.

The inlet type AC cable is adopted. 

Form	Stereo Integrated Amplifier
Output power (20Hz - 20kHz, both channel drive)	90W+90W (4ohms) 75W+75W (6ohms) 60W+60W (8ohms)
THD (20Hz - 20kHz, both channel drive)	0.01% (at the time of an 8-ohm load intensity)
Cross modulation distortion (SMPTE)	0.01%
Output bandwidth (an 8-ohm load intensity, 0.04%)	10Hz - 50kHz
Frequency characteristic (compact disk, Source Direct)	5Hz-70kHz+0 -1 dB
Dumping factor (20Hz - 20kHz)	100 (8-ohm load intensity)
Input sensitivity/impedance	Phono man month: 2.4mV/47kohm High SFT Level: 210mV/25kohm
SN ratio (an IHF A network, input short-circuit)	Phono MM:85dB High Level:110dB
Tone control	Bass: ±8dB (100Hz) Treble: ±8dB (10kHz)
Supply voltage	AC100V, 50Hz/60Hz
Power consumption (Electrical Appliance and Material Control Law)	160W
The maximum Dimensions	Width 440x height 124x depth of 340mm
Weight	9.0kg
Adjunct	System remote control AC cable

Read more »

Marantz PM8000 65,000yen(1999 release)

　
The Integrated Amplifier of C series which regazed at the thought and the technology also for the half century that the Marantz has followed, and put into practice the "first priority of the musical reproductivity" which is an original policy.

The pure Class-A operation is adopted. Moreover, the twin monophonic construction is adopted.

4-unit active volume is carried and the feeling of SN on Hearing impression is improved.

HDAM original with a Marantz is carried.

The Source-Direct switchpoint and the active-filter NFB type tone control circuit are carried.

Parts, such as a high-quality sound capacitor, are adopted.

The aluminum panel of hairline finish is adopted as the front panel at gold finish.

The system remote control which makes concurrent operation of Marantz products possible is attached

Form	Integrated Amplifier
Output power (20Hz - 20kHz, both channel drive)	Class AB: 100W+100W (8ohms) Class A: 25W+25W (8ohms)
THD (20Hz - 20kHz, 8ohms)	Class AB: 0.015% A:0.010% of a class
Frequency characteristic (compact disk, Source Direct)	10Hz-100kHz+0 -1 dB
Input sensitivity/impedance	Phono man month: 2.5mV/47kohm High level: 150mV/20kohm
Phono maximum permissible input (1kHz)	MM:150mV
RIAA deflection	20Hz-2dB/40Hz-20kHz±0.5dB
SN ratio (IHF, A network, input short-circuit)	Phono MM:85dB
Input/output terminal	Line input: Four lines Tapes input/output: One line Processor input/output: One line Phono input: One line CD-Recordable / micro-disk input/output: One line Headphone output: One line Speaker output: Two lines
Supply voltage	AC100V, 50Hz/60Hz
Power consumption	160W (Electrical Appliance and Material Control Law)
The maximum Dimensions	Width 440x height 159x depth of 370.5mm
Weight	12.3kg
Adjunct	System remote control

Read more »

Marantz PM6100SA ver.2 43,000yen(2003 release)

The Integrated Amplifier which raised completeness by supplying Absolute SA Technology which improves a part, and a powering and wiring based on PM6100SA.

The current feedback type preamplifier is adopted as a preamplifier part, and a low-noise / high-slew-rate-ization is attained.
Moreover, the modification of the tone quality is aimed at by adopting a high-quality sound type electrolytic capacitor.

Current feedback type power amplifier is adopted as a power amplifier part, and the transistor LAPT for audios is adopted as a power device.
Moreover, in Ver.2, the schottky-barrier diode is carried in each rectifier circuit of a power-source part.

The high-quality sound polypropylene capacitor and the low-noise metal film resistor are adopted as each circuitry.
Moreover, the shake of potential is lost by improving, while grand potential also repeats a tone-quality study.

The speaker terminal by German WBT is adopted as a speaker terminal.

The full REC serector with the Lec buffer is carried.

The phone equalizer amplifier corresponding to man-month cartridge is carried.

The inlet type AC jack is adopted.

A by amplifier drive is also possible in the combination of SM6100SA ver.2.

The wireless remote control which Marantz products, such as compact-disk7300, can control is attached. 

Form	Integrated Amplifier
Output power (20Hz - 20kHz, both channel simultaneous drive)	70W+70W (4ohms) 60W+60W (6ohms) 50W+50W (8ohms)
THD (20Hz - 20kHz, both channel simultaneous drive, 8ohms)	0.01%
Cross modulation distortion (SMPTE)	0.01%
Output bandwidth (an 8-ohm load intensity, 0.04%)	10Hz - 50kHz
Frequency characteristic (compact disk, Source Direct)	5Hz-60kHz+0 -1 dB
Dumping factor (8 ohms, 20Hz - 20kHz)	100
Input sensitivity/impedance	Phono man month: 2.3mV/47kohm High SFT Level: 200mV/15kohm
Phono maximum permissible input (1kHz)	MM:130mV
RIAA deflection (20Hz - 20kHz)	±0.2dB
S/N (an IHF A network, input short-circuit)	Phono MM:85dB High Level:110dB
Tone control	Bass: ±8dB (100Hz) Treble: ±8dB (10kHz)
Input terminal	Line: Three lines (compact disk, Tuner, Aux/DVD) micro disk or a tapes system: One line CD-Recordable: 1 line Phono: One line
Output-terminal	Pre out: One line micro disk or a tapes system: One line CD-Recordable: 1 line Speaker: One line Headphone: One line
Supply voltage	AC100V, 50Hz/60Hz
Power consumption (Electrical Appliance and Material Safety Law)	135W
The maximum Dimensions	Width 440x height 124x depth of 340mm
Weight	7.5kg
Adjunct	Wireless remote control AC cable

Read more »

Marantz PM6100SA 39,800yen(2000 release)

The Integrated Amplifier which inherited the design concept and the advanced circuitry technology of PM14SA and PM-17SA, and aimed at the correspondence to a next-generation audio.

The Puri Power independent stream composition is adopted and the play capacity of a current feedback type preamplifier is pulled out.

The preamplifier part has adopted the high current feedback type preamplifier of drive capacity by the low-noise/high slew rate, and has secured the accelerating and dynamic range which can respond to a next-generation audio.
Moreover, the pre-out termination is carried and a by amplifier drive is also possible at cooperation with SM6100SA.

A current feedback type is adopted also as a power amplifier part, and high speed-ization is attained.
Moreover, L-A-P-T excellent in the high region property is adopted as a power device.

The speaker terminal by WBT is adopted as a speaker terminal, and the banana plug and Y lug are also supported.

The Lec buffer amplifier for exclusive use is carried in the Rec out output from compact disk.

compact-disk direct input directly linked with a preamplifier part by exclusive relay from an input is carried.

The tone control and the loudness are carried.

The inlet type AC cable is adopted.

System remote control is attached and an operation of DVD pre Ya made from a Marantz, micro-disk recorder, and compact-disk recorder is also possible. 

Form	Stereo Integrated Amplifier
Output power (20Hz - 20kHz, both channel drive)	70W+70W (4ohms) 60W+60W (6ohms) 50W+50W (8ohms)
THD (20Hz - 20kHz, both channel drive)	0.01% (at the time of an 8-ohm load intensity)
Cross modulation distortion (SMPTE)	0.01%
Output bandwidth (an 8-ohm load intensity, 0.04%)	10Hz - 50kHz
Frequency characteristic (compact disk, Source Direct)	5Hz-60kHz+0 -1 dB
Dumping factor (20Hz - 20kHz)	100 (8-ohm load intensity) or more
Input sensitivity/impedance	Phono man month: 2.3mV/47kohm High SFT Level: 200mV/15kohm
SN ratio (an IHF A network, input short-circuit)	Phono MM:85dB High Level:110dB
Tone control	Bass: ±8dB (100Hz) Treble: ±8dB (10kHz)
Supply voltage	AC100V, 50Hz/60Hz
Power consumption (Electrical Appliance and Material Control Law)	135W
The maximum Dimensions	Width 440x height 124x depth of 340mm
Weight	7.5kg
Adjunct	System remote control AC cable

Read more »

Marantz PM4400 27,000yen(October, 2003 release)

he Integrated Amplifier which uses the circuitry high speed technology "Absolute SA Technology" original with a Marantz.

"Absolute SA Technology" which is a circuitry high speed technology cultivated from the high order model is adopted as much as possible.
In PM4400, the design with emphasis on shortening and low-noise-izing of a signal line and a power-source line is carried out. Two relays are added to the speaker output change part, and, specifically, the loss in the signal path is lost by this.
In addition, the review of the placement is aimed at in order to reduce the thickness of a using wire, a review of a path, and the influence of the leakage of a transformer.

The Phono input terminal corresponding to man-month cartridge is carried.

Two speaker output-terminals are carried and the by wire interconnection is also supported.

Functionalities, such as a tone control, a loudness, and a full REC selector, are carried.

The Marantz remote-control termination is carried.

The wireless remote control in which power-source on/off of PM4400, volume up/down, and an input switching are possible is attached.
Moreover, with this remote control, elementary operation, such as DVD/compact disk player, a tuner, and a cassette deck, is possible.

Two kinds of variations, gold and black, occurred. 

Form	Integrated Amplifier
Output power (20Hz - 20kHz, both channel drive)	50W+50W (4ohms) 40W+40W (6ohms) 30W+30W (8ohms)
Dynamic power	70W+70W (4ohms) 60W+60W (6ohms) 50W+50W (8ohms)
THD (both channel simultaneous drive)	0.03% (20Hz - 20kHz, 8-ohm load intensity)
Cross modulation distortion (SMPTE)	0.015%
Output bandwidth (an 8-ohm load intensity, 0.03%)	10Hz - 50kHz
Frequency characteristic (compact disk, tone defeat)	10Hz-100kHz+0 -3 dB
Dumping factor	60 (an 8-ohm load intensity, 20Hz - 20kHz)
Input sensitivity/impedance	Phono man month: 2.5mV/47kohm High SFT Level: 150mV/20kohm
Phono maximum permissible input (1kHz)	MM:170mV
RIAA deflection (20Hz - 20kHz)	20Hz -3dB 40Hz-20kHz±0.3dB
S/N ratio (A wait correction)	Phono MM:88dB High Level:96dB
Input terminal	compact disk: One line Phono: One line (with a GND termination) Line: Two lines (Tuner, Aux/DVD) Tapes: Two lines (CD-Recordable/micro disk, Tape)
Output-terminal	Speaker: Two lines Headphone: One line
AC outlet	Switched: Two lines Unswitched: One line
Supply voltage	AC100V, 50Hz/60Hz
Power consumption	100W (Electrical Appliance and Material Safety Law)
The maximum Dimensions	Width 440x height 116x depth of 343mm
Weight	6.0kg
Adjunct	System remote control rc4200

Read more »

Marantz PM520DC 59,800yen(1982 release)

　
The stereo Integrated Amplifier which carries 5 band graphic equalizer.

There were two kinds, gold and silver. 

Form	Integrated Amplifier
Output power (20Hz - 20kHz)	48W+48W (8ohms)
THD	0.025% (at the time of an Output power 8ohms)
Input sensitivity/impedance	Tuner, Aux/compact disk, Tape:150mV/20kohm Mic: 0.3mV/10kohm Phono: 2.3mV/47kohm
SN ratio (IHF-A)	Phono:82dB
Power consumption	130W
Dimensions	Width 416x height 100x depth of 300mm
Weight	7.5kg

Read more »

Marantz PM420 45,800yen(1982 release)

The Integrated Amplifier which adopted the easy operation design and the thin compact design.

The microphone input plug with an autofader functionality which responds to a mike input automatically is carried.

In order to prevent mixing of a foreign material etc., the measures against a net are taken against the top plate and the sole plate. 

Form	Integrated Amplifier
Input/output terminal	Line input: Four lines Tapes system input/output: One line Speaker output: One line
Output power (both channel operation)	30W+30W (8 ohms, 1kHz)
THD	0.05% (1kHz, 8ohms)
Frequency characteristic	compact-disk: 10Hz-50kHz+0 -3dB
SN ratio (A network, input short-circuit)	Line: 85dB
Power consumption	65W (Electrical Appliance and Material Control Law)
The maximum Dimensions	Width 439x height 87x depth of 230mm
Weight	4.2kg

Read more »

Marantz PM245 29,800yen(1997 release)

The Integrated Amplifier which adopted the easy operation design and the thin compact design.

The microphone input plug with an autofader functionality which responds to a mike input automatically is carried.

In order to prevent mixing of a foreign material etc., the measures against a net are taken against the top plate and the sole plate. 

Form	Integrated Amplifier
Input/output terminal	Line input: Four lines Tapes system input/output: One line Speaker output: One line
Output power (both channel operation)	30W+30W (8 ohms, 1kHz)
THD	0.05% (1kHz, 8ohms)
Frequency characteristic	compact-disk: 10Hz-50kHz+0 -3dB
SN ratio (A network, input short-circuit)	Line: 85dB
Power consumption	65W (Electrical Appliance and Material Control Law)
The maximum Dimensions	Width 439x height 87x depth of 230mm
Weight	4.2kg

Read more »

Marantz PM-99SE 330,000yen(1992 release)

The Integrated Amplifier which gave tune amplifier based on the chassis construction of PM-90.
The unification part of SE series and newly developed technologies including a high-speed module are supplied, and S/N on Hearing impression and the further improvement in speaker drive capacity are aimed at.

A total of ten HDAM which is the high-speed voltage amplification modules which realize an exact signal amplification in several seconds is adopted.
Thereby, a feeling of density and speediness of play sound are improved.

The new model MOS FET was selected carefully to the power block, and it has adopted by the parallel push pull.
The electric-current drive capacity to exceed the time of a triple push pull using of conventional MOS FET by this is acquired.

By combining HDAM with 4-unit active volume, the volume part has expanded the gain variable span sharply. Moreover, by adopting a resistor rotation type as volume component partses, and considering it as a low-impedance specification, S/N at the time of a real using is raised.

The low double foil chemicon with a copper shielding, the top cover of the 70micro foil printed circuit board, a silicon steel board shielding board, a sub- die-casting panel, a copper plating die-casting chassis, and 3mm thickness, etc. are adopted, and shielding capacity and vibration suppression nature are raised.

The large-sized toroidal power transformer is adopted as a power-source part. 

Form	Stereo Integrated Amplifier
Output power	At the time of a Class-A operation : 60W+60W (4ohms) 40W+40W (6ohms) 30W+30W (8ohms) At the time of AB class operation : 200W+200W (4ohms) 160W+160W (6ohms) 130W+130W (8ohms)
THD	0.005%
Frequency characteristic	10Hz-100kHz+0 -1 dB
SN ratio	High Level:111dB
Input terminal	compact-disk balance input: One line Line input: Four lines Phono input: One line DCC, a Tape input: Three lines
Output-terminal	DCC, a Tape output: Three lines Speaker output: One line
Power consumption	350W (Electrical Appliance and Material Control Law)
Dimensions	Width 454x height 170x depth of 460mm
Weight	26.0kg

Read more »

Marantz PM-95 319,000yen(1988 release)

　
Digital integrated amplifier which carries a digital analog converter.

It was selected carefully from device"A version" of the Philips Marantz group by the D-A-conversion part, TDA1541 A-S1 LSI on which the crown multiple asynchronously communicating hosts proving the best was stamped is adopted as it, and the tone quality excellent in especially the reproductivity in a low is realized.

The power amplifier part has the simple composition that an input signal is direct fed from a volume, and the first rank is a differential amplification of a cascode interconnection, and has secured sufficient gain (gain) with the combination of FET and a bipolar transistor.
The output stage has adopted Power-MOS FET which is a triple push pull stream composition and is an element of the power amplification for audios. Moreover, two kinds of operation methods, a pure Class-A operation and AB class operation, can be chosen by switchpoint switching.

The large-sized toroidal transformer and the mass LowESR type capacitor are carried in the power-source part. Moreover, in order to drive a speaker powerfully, oxygen free high conductivity copper 1.53mm in diameter is used for product-line material.
Moreover, in order to prevent the wraparound to the analog circuit of a digital noise, the power-source part which became independent, respectively is adopted, and the high speed power source which made full use of high-integrated IC of a low-noise wide band is carried in the analog system.
Furthermore, consideration which thought as important a tone quality, such as using the copper plate of non-magnetic material also for capacitor fixing metal, is carried out.

it is hard to produce a mechanical distortion by adopting as a chassis the die-casting chassis which gave the copper plating, and also adopting a die-casting side panel high rigid structure is realized. Moreover, a heat sink uses high-intensity aluminum material with a right-and-left independent structure, and is performing the efficient air cooling without blower by the absent resonance.
in addition, aluminum shaving appearance is carried out to a volume knob, and it finishes, it puts into practice adopting the Copper-foil pattern of 70-micrometer thickness as the printed circuit board based on a polyesters etc., and no vibrating and an absent resonance are investigated.
Furthermore, a highly efficient relay (25 pieces) is adopted as the shielding which intercepts a digital part and an analog part completely, and a function change. A pattern product line is also combined by the shortest distance, and the improvement in a separation is aimed at.

A digital-analog-converter output can be directly fed into a master volume with a digital direct switchpoint.

As an option, there is remote controller rc-95PM with command memory (learning function), and a remote control operation of the audio-visual apparatus of PM-95 or others is possible from a listening position. 

Form	Digital integrated amplifier
<Overall characteristic>
Output power (at the time of 20Hz - 20kHz, and both channel operation)	At the time of a first class operation : 50W+50W (4ohms) 40W+40W (6ohms) 30W+30W (8ohms) At the time of AB class operation : 190W+190W (4ohms) 155W+155W (6ohms) 120W+120W (8ohms)
Dynamic power (at the time of AB class operation)	460W+460W (2ohms) 300W+300W (4ohms) 230W+230W (6ohms)
THD	0.008% (20Hz - 20kHz, 8-ohm load intensity)
Cross modulation distortion	0.008%(SMPTE)
Output bandwidth (an 8-ohm load intensity, THD0.04%)	10Hz - 40kHz
Frequency characteristic	10Hz-150kHz+0 -3 dB
Dumping factor	200 (an 8-ohm load intensity, 1kHz)
Input sensitivity/impedance	150mV/33kohm (1kHz)
SN ratio	106dB (A network)
<Digital-analog-converter part>
Digital sampling frequency	32kHz, 44.1kHz, 48kHz
SN ratio	106dB(EIAJ)
Distortion	0.003%(EIAJ)
Dynamic range	98dB
Digital input	Coaxial: 0.5 Vp-p/75ohms Optical: -15dBm--25dBm
Digital output	Coaxial: 0.5 Vp-p/75ohms
<Others>
Supply voltage	AC100V, 50Hz/60Hz
Power dissipation	330W (Electrical Appliance and Material Control Law)
The maximum Dimensions	Width 454x height 170x depth of 457mm
Weight	27.2kg
Option: Command master rc-95PM (\40,000)
The maximum Dimensions	Width 260x height 31x depth of 126mm
Option	730g (battery included)

Read more »